Series 8000 LI - Fiber Lined Dual Chamber Furnaces

Unique “Space Saver” design offers convenience and economy of two independently controlled chambers in one packaged assembly. The upper chamber (Hardening) is designed with lightweight ceramic fiber insulation for energy saving low power input and maximum heating efficiency for operation to 2200°F. Upper chamber coil wound heating elements are fully supported on ceramic rods for rapid radiation with faster heat up rates. This unique design provides easy element access and low cost, individual replacement of wires. The lower chamber (Tempering) is complete with a stainless steel liner and fan to recirculate heat for uniform temperature. Available at operating temperatures of 800°F (88), 1200°F (82), 1400°F (84), and 1600°F (86). Ideal for Tool Rooms and Schools, providing a complete heat treat station in one furnace.

Ruggedly constructed and rated for work loads up to 40 lbs. per square foot of hearth area. All models are completely wired, assembled, test fired and shipped ready for connection to main power supply. Compact design, fast installation, and simple, safe, dependable operation.

Standard Features

  • Welded sheet metal single shell construction.
  • Both chambers designed with same working dimensions.
  • Heavy gauge coil wound low watt density heating elements for longer life.
  • Multi-layered energy efficient lightweight ceramic fiber insulation in upper chamber and firebrick in lower oven for maximum heat storage and minimum heat loss.
  • Lower chamber elements mounted in easy-to-replace holders on side walls.
  • Hearth plate for load support and floor brick protection in upper chamber.
  • Horizontal swing doors on both chambers.
  • Safety micro-switch shuts off power to elements and fan when door opens.
  • Honeywell digital temperature controller with type K thermocouple and magnetic contactor on each chamber.
  • Controls are mounted in a separate side mounted NEMA 1 panel and operate on 115 volts.

Notes: Quench tanks may be stored below furnaces with chamber heights through 12” high.

Options

Program controllers, over temperature safety systems, timers, recorders, quench tanks, alternate door arrangements, forced cooling systems, computer interface, special voltages, gloves, tongs and foil wrap.

Recent News

Specifications

Model Chamber Overall KW Voltage Weight (lbs)
H" W" L" H" W" L"
LI8-A6 6 6 6 52 24 32 2.25 230/1 280
LI8-A9 6 6 9 52 24 36 3 230/1 320
LI8-A12 6 6 12 52 24 38 4.5 230/1 450
LI8-A18 6 6 18 52 24 44 5.5 230/1 570
LI8-B9 9 9 9 52 27 36 5.5 230/1 540
LI-B12 9 9 12 52 27 38 6.5 230/1 600
LI8-B18 9 9 18 52 27 44 8.5 230/1 650
LI8-B24 9 9 24 52 27 50 11 230/1 730
LI8-H12 9 12 12 52 31 38 7.5 230/1 615
LI8-H18 9 12 18 52 31 44 11 230/1 700
LI8-H24 9 12 24 52 31 50 13 230/1 770
LI8-H36 9 12 36 52 31 62 18 230/460/3 800
LI-K12 12 12 12 60 31 38 9 230/1 720
LI-K18 12 12 18 60 31 44 13 230/460/1 800
LI-K24 12 12 24 60 31 50 17.5 230/460/1 870
LI-K36 12 12 36 60 31 62 21 230/460/3 920
LI-M18 12 18 18 60 37 44 19.5 230/460/1 850
LI-M24 12 18 24 60 37 50 23 230/460/3 1075
LI-M36 12 18 36 60 37 62 25 230/460/3 1225

Downloads